Zend\Feed\Reader\Reader

Introduction

Zend\Feed\Reader\Reader is a component used to consume RSS and Atom feeds of any version, including RDF/RSS 1.0, RSS 2.0, Atom 0.3 and Atom 1.0. The API for retrieving feed data is deliberately simple since Zend\Feed\Reader is capable of searching any feed of any type for the information requested through the API. If the typical elements containing this information are not present, it will adapt and fall back on a variety of alternative elements instead. This ability to choose from alternatives removes the need for users to create their own abstraction layer on top of the component to make it useful or have any in-depth knowledge of the underlying standards, current alternatives, and namespaced extensions.

Internally, Zend\Feed\Reader\Reader works almost entirely on the basis of making XPath queries against the feed XML‘s Document Object Model. This singular approach to parsing is consistent and the component offers a plugin system to add to the Feed and Entry level API by writing Extensions on a similar basis.

Performance is assisted in three ways. First of all, Zend\Feed\Reader\Reader supports caching using Zend\Cache to maintain a copy of the original feed XML. This allows you to skip network requests for a feed URI if the cache is valid. Second, the Feed and Entry level API is backed by an internal cache (non-persistent) so repeat API calls for the same feed will avoid additional DOM or XPath use. Thirdly, importing feeds from a URI can take advantage of HTTP Conditional GET requests which allow servers to issue an empty 304 response when the requested feed has not changed since the last time you requested it. In the final case, an instance of Zend\Cache will hold the last received feed along with the ETag and Last-Modified header values sent in the HTTP response.

Zend\Feed\Reader\Reader is not capable of constructing feeds and delegates this responsibility to Zend\Feed\Writer\Writer.

Importing Feeds

Feeds can be imported from a string, file or an URI. Importing from a URI can additionally utilise a HTTP Conditional GET request. If importing fails, an exception will be raised. The end result will be an object of type Zend\Feed\Reader\Feed\AbstractFeed, the core implementations of which are Zend\Feed\Reader\Feed\Rss and Zend\Feed\Reader\Feed\Atom. Both objects support multiple (all existing) versions of these broad feed types.

In the following example, we import an RDF/RSS 1.0 feed and extract some basic information that can be saved to a database or elsewhere.

$feed = Zend\Feed\Reader\Reader::import('http://www.planet-php.net/rdf/');
$data = array(
    'title'        => $feed->getTitle(),
    'link'         => $feed->getLink(),
    'dateModified' => $feed->getDateModified(),
    'description'  => $feed->getDescription(),
    'language'     => $feed->getLanguage(),
    'entries'      => array(),
);

foreach ($feed as $entry) {
    $edata = array(
        'title'        => $entry->getTitle(),
        'description'  => $entry->getDescription(),
        'dateModified' => $entry->getDateModified(),
        'authors'      => $entry->getAuthors(),
        'link'         => $entry->getLink(),
        'content'      => $entry->getContent()
    );
    $data['entries'][] = $edata;
}

The example above demonstrates Zend\Feed\Reader\Reader‘s API, and it also demonstrates some of its internal operation. In reality, the RDF feed selected does not have any native date or author elements, however it does utilise the Dublin Core 1.1 module which offers namespaced creator and date elements. Zend\Feed\Reader\Reader falls back on these and similar options if no relevant native elements exist. If it absolutely cannot find an alternative it will return NULL, indicating the information could not be found in the feed. You should note that classes implementing Zend\Feed\Reader\Feed\AbstractFeed also implement the SPL Iterator and Countable interfaces.

Feeds can also be imported from strings or files.

// from a URI
$feed = Zend\Feed\Reader\Reader::import('http://www.planet-php.net/rdf/');

// from a String
$feed = Zend\Feed\Reader\Reader::importString($feedXmlString);

// from a file
$feed = Zend\Feed\Reader\Reader::importFile('./feed.xml');

Retrieving Underlying Feed and Entry Sources

Zend\Feed\Reader\Reader does its best not to stick you in a narrow confine. If you need to work on a feed outside of Zend\Feed\Reader\Reader, you can extract the base DOMDocument or DOMElement objects from any class, or even an XML string containing these. Also provided are methods to extract the current DOMXPath object (with all core and Extension namespaces registered) and the correct prefix used in all XPath queries for the current Feed or Entry. The basic methods to use (on any object) are saveXml(), getDomDocument(), getElement(), getXpath() and getXpathPrefix(). These will let you break free of Zend\Feed\Reader and do whatever else you want.

• saveXml() returns an XML string containing only the element representing the current object.
• getDomDocument() returns the DOMDocument object representing the entire feed (even if called from an Entry object).
• getElement() returns the DOMElement of the current object (i.e. the Feed or current Entry).
• getXpath() returns the DOMXPath object for the current feed (even if called from an Entry object) with the namespaces of the current feed type and all loaded Extensions pre-registered.
• getXpathPrefix() returns the query prefix for the current object (i.e. the Feed or current Entry) which includes the correct XPath query path for that specific Feed or Entry.

Here’s an example where a feed might include an RSS Extension not supported by Zend\Feed\Reader\Reader out of the box. Notably, you could write and register an Extension (covered later) to do this, but that’s not always warranted for a quick check. You must register any new namespaces on the DOMXPath object before use unless they are registered by Zend\Feed\Reader or an Extension beforehand.

$feed        = Zend\Feed\Reader\Reader::import('http://www.planet-php.net/rdf/');
$xpathPrefix = $feed->getXpathPrefix();
$xpath       = $feed->getXpath();
$xpath->registerNamespace('admin', 'http://webns.net/mvcb/');
$reportErrorsTo = $xpath->evaluate('string('
                                 . $xpathPrefix
                                 . '/admin:errorReportsTo)');

Warning

If you register an already registered namespace with a different prefix name to that used internally by Zend\Feed\Reader\Reader, it will break the internal operation of this component.

Cache Support and Intelligent Requests

Adding Cache Support to Zend\Feed\Reader\Reader

Zend\Feed\Reader\Reader supports using an instance of Zend\Cache to cache feeds (as XML) to avoid unnecessary network requests. Adding a cache is as simple here as it is for other Zend Framework components, create and configure your cache and then tell Zend\Feed\Reader\Reader to use it! The cache key used is “Zend\Feed\Reader\” followed by the MD5 hash of the feed’s URI.

$cache = Zend\Cache\StorageFactory::adapterFactory('Memory');

Zend\Feed\Reader\Reader::setCache($cache);

HTTP Conditional GET Support

The big question often asked when importing a feed frequently, is if it has even changed. With a cache enabled, you can add HTTP Conditional GET support to your arsenal to answer that question.

Using this method, you can request feeds from URIs and include their last known ETag and Last-Modified response header values with the request (using the If-None-Match and If-Modified-Since headers). If the feed on the server remains unchanged, you should receive a 304 response which tells Zend\Feed\Reader\Reader to use the cached version. If a full feed is sent in a response with a status code of 200, this means the feed has changed and Zend\Feed\Reader\Reader will parse the new version and save it to the cache. It will also cache the new ETag and Last-Modified header values for future use.

These “conditional” requests are not guaranteed to be supported by the server you request a URI of, but can be attempted regardless. Most common feed sources like blogs should however have this supported. To enable conditional requests, you will need to provide a cache to Zend\Feed\Reader\Reader.

$cache = Zend\Cache\StorageFactory::adapterFactory('Memory');

Zend\Feed\Reader\Reader::setCache($cache);
Zend\Feed\Reader\Reader::useHttpConditionalGet();

$feed = Zend\Feed\Reader\Reader::import('http://www.planet-php.net/rdf/');

In the example above, with HTTP Conditional GET requests enabled, the response header values for ETag and Last-Modified will be cached along with the feed. For the the cache’s lifetime, feeds will only be updated on the cache if a non-304 response is received containing a valid RSS or Atom XML document.

If you intend on managing request headers from outside Zend\Feed\Reader\Reader, you can set the relevant If-None-Matches and If-Modified-Since request headers via the URI import method.

$lastEtagReceived = '5e6cefe7df5a7e95c8b1ba1a2ccaff3d';
$lastModifiedDateReceived = 'Wed, 08 Jul 2009 13:37:22 GMT';
$feed = Zend\Feed\Reader\Reader::import(
    $uri, $lastEtagReceived, $lastModifiedDateReceived
);

Locating Feed URIs from Websites

These days, many websites are aware that the location of their XML feeds is not always obvious. A small RDF, RSS or Atom graphic helps when the user is reading the page, but what about when a machine visits trying to identify where your feeds are located? To assist in this, websites may point to their feeds using <link> tags in the <head> section of their HTML. To take advantage of this, you can use Zend\Feed\Reader\Reader to locate these feeds using the static findFeedLinks() method.

This method calls any URI and searches for the location of RSS, RDF and Atom feeds assuming the website’s HTML contains the relevant links. It then returns a value object where you can check for the existence of a RSS, RDF or Atom feed URI.

The returned object is an ArrayObject subclass called Zend\Feed\Reader\FeedSet so you can cast it to an array, or iterate over it, to access all the detected links. However, as a simple shortcut, you can just grab the first RSS, RDF or Atom link using its public properties as in the example below. Otherwise, each element of the ArrayObject is a simple array with the keys “type” and “uri” where the type is one of “rdf”, “rss” or “atom”.

$links = Zend\Feed\Reader\Reader::findFeedLinks('http://www.planet-php.net');

if (isset($links->rdf)) {
    echo $links->rdf, "\n"; // http://www.planet-php.org/rdf/
}
if (isset($links->rss)) {
    echo $links->rss, "\n"; // http://www.planet-php.org/rss/
}
if (isset($links->atom)) {
    echo $links->atom, "\n"; // http://www.planet-php.org/atom/
}

Based on these links, you can then import from whichever source you wish in the usual manner.

This quick method only gives you one link for each feed type, but websites may indicate many links of any type. Perhaps it’s a news site with a RSS feed for each news category. You can iterate over all links using the ArrayObject’s iterator.

$links = Zend\Feed\Reader::findFeedLinks('http://www.planet-php.net');

foreach ($links as $link) {
    echo $link['href'], "\n";
}

Attribute Collections

In an attempt to simplify return types, return types from the various feed and entry level methods may include an object of type Zend\Feed\Reader\Collection\AbstractCollection. Despite the special class name which I’ll explain below, this is just a simple subclass of SPL‘s ArrayObject.

The main purpose here is to allow the presentation of as much data as possible from the requested elements, while still allowing access to the most relevant data as a simple array. This also enforces a standard approach to returning such data which previously may have wandered between arrays and objects.

The new class type acts identically to ArrayObject with the sole addition being a new method getValues() which returns a simple flat array containing the most relevant information.

A simple example of this is Zend\Feed\Reader\Reader\FeedInterface::getCategories(). When used with any RSS or Atom feed, this method will return category data as a container object called Zend\Feed\Reader\Collection\Category. The container object will contain, per category, three fields of data: term, scheme and label. The “term” is the basic category name, often machine readable (i.e. plays nice with URIs). The scheme represents a categorisation scheme (usually a URI identifier) also known as a “domain” in RSS 2.0. The “label” is a human readable category name which supports HTML entities. In RSS 2.0, there is no label attribute so it is always set to the same value as the term for convenience.

To access category labels by themselves in a simple value array, you might commit to something like:

$feed = Zend\Feed\Reader\Reader::import('http://www.example.com/atom.xml');
$categories = $feed->getCategories();
$labels = array();
foreach ($categories as $cat) {
    $labels[] = $cat['label']
}

It’s a contrived example, but the point is that the labels are tied up with other information.

However, the container class allows you to access the “most relevant” data as a simple array using the getValues() method. The concept of “most relevant” is obviously a judgement call. For categories it means the category labels (not the terms or schemes) while for authors it would be the authors’ names (not their email addresses or URIs). The simple array is flat (just values) and passed through array_unique() to remove duplication.

$feed = Zend\Feed\Reader\Reader::import('http://www.example.com/atom.xml');
$categories = $feed->getCategories();
$labels = $categories->getValues();

The above example shows how to extract only labels and nothing else thus giving simple access to the category labels without any additional work to extract that data by itself.

Retrieving Feed Information

Retrieving information from a feed (we’ll cover entries and items in the next section though they follow identical principals) uses a clearly defined API which is exactly the same regardless of whether the feed in question is RSS, RDF or Atom. The same goes for sub-versions of these standards and we’ve tested every single RSS and Atom version. While the underlying feed XML can differ substantially in terms of the tags and elements they present, they nonetheless are all trying to convey similar information and to reflect this all the differences and wrangling over alternative tags are handled internally by Zend\Feed\Reader\Reader presenting you with an identical interface for each. Ideally, you should not have to care whether a feed is RSS or Atom so long as you can extract the information you want.

Note

While determining common ground between feed types is itself complex, it should be noted that RSS in particular is a constantly disputed “specification”. This has its roots in the original RSS 2.0 document which contains ambiguities and does not detail the correct treatment of all elements. As a result, this component rigorously applies the RSS 2.0.11 Specification published by the RSS Advisory Board and its accompanying RSS Best Practices Profile. No other interpretation of RSS 2.0 will be supported though exceptions may be allowed where it does not directly prevent the application of the two documents mentioned above.

Of course, we don’t live in an ideal world so there may be times the API just does not cover what you’re looking for. To assist you, Zend\Feed\Reader\Reader offers a plugin system which allows you to write Extensions to expand the core API and cover any additional data you are trying to extract from feeds. If writing another Extension is too much trouble, you can simply grab the underlying DOM or XPath objects and do it by hand in your application. Of course, we really do encourage writing an Extension simply to make it more portable and reusable, and useful Extensions may be proposed to the Framework for formal addition.

Here’s a summary of the Core API for Feeds. You should note it comprises not only the basic RSS and Atom standards, but also accounts for a number of included Extensions bundled with Zend\Feed\Reader\Reader. The naming of these Extension sourced methods remain fairly generic - all Extension methods operate at the same level as the Core API though we do allow you to retrieve any specific Extension object separately if required.

Feed Level API Methods

getId()	Returns a unique ID associated with this feed
getTitle()	Returns the title of the feed
getDescription()	Returns the text description of the feed.
getLink()	Returns a URI to the HTML website containing the same or similar information as this feed (i.e. if the feed is from a blog, it should provide the blog’s URI where the HTML version of the entries can be read).
getFeedLink()	Returns the URI of this feed, which may be the same as the URI used to import the feed. There are important cases where the feed link may differ because the source URI is being updated and is intended to be removed in the future.
getAuthors()	Returns an object of type ZendFeedReaderCollectionAuthor which is an ArrayObject whose elements are each simple arrays containing any combination of the keys “name”, “email” and “uri”. Where irrelevant to the source data, some of these keys may be omitted.
getAuthor(integer $index = 0)	Returns either the first author known, or with the optional $index parameter any specific index on the array of Authors as described above (returning NULL if an invalid index).
getDateCreated()	Returns the date on which this feed was created. Generally only applicable to Atom where it represents the date the resource described by an Atom 1.0 document was created. The returned date will be a DateTime object.
getDateModified()	Returns the date on which this feed was last modified. The returned date will be a DateTime object.
getLastBuildDate()	Returns the date on which this feed was last built. The returned date will be a DateTime object. This is only supported by RSS - Atom feeds will always return NULL.
getLanguage()	Returns the language of the feed (if defined) or simply the language noted in the XML document.
getGenerator()	Returns the generator of the feed, e.g. the software which generated it. This may differ between RSS and Atom since Atom defines a different notation.
getCopyright()	Returns any copyright notice associated with the feed.
getHubs()	Returns an array of all Hub Server URI endpoints which are advertised by the feed for use with the Pubsubhubbub Protocol, allowing subscriptions to the feed for real-time updates.
getCategories()	Returns a ZendFeedReaderCollectionCategory object containing the details of any categories associated with the overall feed. The supported fields include “term” (the machine readable category name), “scheme” (the categorisation scheme and domain for this category), and “label” (a HTML decoded human readable category name). Where any of the three fields are absent from the field, they are either set to the closest available alternative or, in the case of “scheme”, set to NULL.
getImage()	Returns an array containing data relating to any feed image or logo, or NULL if no image found. The resulting array may contain the following keys: uri, link, title, description, height, and width. Atom logos only contain a URI so the remaining metadata is drawn from RSS feeds only.

Given the variety of feeds in the wild, some of these methods will undoubtedly return NULL indicating the relevant information couldn’t be located. Where possible, Zend\Feed\Reader\Reader will fall back on alternative elements during its search. For example, searching an RSS feed for a modification date is more complicated than it looks. RSS 2.0 feeds should include a <lastBuildDate> tag and (or) a <pubDate> element. But what if it doesn’t, maybe this is an RSS 1.0 feed? Perhaps it instead has an <atom:updated> element with identical information (Atom may be used to supplement RSS‘s syntax)? Failing that, we could simply look at the entries, pick the most recent, and use its <pubDate> element. Assuming it exists... Many feeds also use Dublin Core 1.0 or 1.1 <dc:date> elements for feeds and entries. Or we could find Atom lurking again.

The point is, Zend\Feed\Reader\Reader was designed to know this. When you ask for the modification date (or anything else), it will run off and search for all these alternatives until it either gives up and returns NULL, or finds an alternative that should have the right answer.

In addition to the above methods, all Feed objects implement methods for retrieving the DOM and XPath objects for the current feeds as described earlier. Feed objects also implement the SPL Iterator and Countable interfaces. The extended API is summarised below.

Extended Feed Level API Methods

getDomDocument()	Returns the parent DOMDocument object for the entire source XML document
getElement()	Returns the current feed level DOMElement object
saveXml()	Returns a string containing an XML document of the entire feed element (this is not the original document but a rebuilt version)
getXpath()	Returns the DOMXPath object used internally to run queries on the DOMDocument object (this includes core and Extension namespaces pre-registered)
getXpathPrefix()	Returns the valid DOM path prefix prepended to all XPath queries matching the feed being queried
getEncoding()	Returns the encoding of the source XML document (note: this cannot account for errors such as the server sending documents in a different encoding). Where not defined, the default UTF-8 encoding of Unicode is applied.
count()	Returns a count of the entries or items this feed contains (implements SPLCountable interface)
current()	Returns either the current entry (using the current index from key())
key()	Returns the current entry index
next()	Increments the entry index value by one
rewind()	Resets the entry index to 0
valid()	Checks that the current entry index is valid, i.e. it does fall below 0 and does not exceed the number of entries existing.
getExtensions()	Returns an array of all Extension objects loaded for the current feed (note: both feed-level and entry-level Extensions exist, and only feed-level Extensions are returned here). The array keys are of the form {ExtensionName}_Feed.
getExtension(string $name)	Returns an Extension object for the feed registered under the provided name. This allows more fine-grained access to Extensions which may otherwise be hidden within the implementation of the standard API methods.
getType()	Returns a static class constant (e.g. ZendFeedReaderReader::TYPE_ATOM_03, i.e. Atom 0.3) indicating exactly what kind of feed is being consumed.

Retrieving Entry/Item Information

Retrieving information for specific entries or items (depending on whether you speak Atom or RSS) is identical to feed level data. Accessing entries is simply a matter of iterating over a Feed object or using the SPL Iterator interface Feed objects implement and calling the appropriate method on each.

Entry Level API Methods

getId()	Returns a unique ID for the current entry.
getTitle()	Returns the title of the current entry.
getDescription()	Returns a description of the current entry.
getLink()	Returns a URI to the HTML version of the current entry.
getPermaLink()	Returns the permanent link to the current entry. In most cases, this is the same as using getLink().
getAuthors()	Returns an object of type ZendFeedReaderCollectionAuthor which is an ArrayObject whose elements are each simple arrays containing any combination of the keys “name”, “email” and uri”. Where irrelevant to the source data, some of these keys may be omitted.
getAuthor(integer $index = 0)	Returns either the first author known, or with the optional $index parameter any specific index on the array of Authors as described above (returning NULL if an invalid index).
getDateCreated()	Returns the date on which the current entry was created. Generally only applicable to Atom where it represents the date the resource described by an Atom 1.0 document was created.
getDateModified()	Returns the date on which the current entry was last modified
getContent()	Returns the content of the current entry (this has any entities reversed if possible assuming the content type is HTML). The description is returned if a separate content element does not exist.
getEnclosure()	Returns an array containing the value of all attributes from a multi-media <enclosure> element including as array keys: url, length, type. In accordance with the RSS Best Practices Profile of the RSS Advisory Board, no support is offers for multiple enclosures since such support forms no part of the RSS specification.
getCommentCount()	Returns the number of comments made on this entry at the time the feed was last generated
getCommentLink()	Returns a URI pointing to the HTML page where comments can be made on this entry
getCommentFeedLink([string $type = ‘atom’|’rss’])	Returns a URI pointing to a feed of the provided type containing all comments for this entry (type defaults to Atom/RSS depending on current feed type).
getCategories()	Returns a ZendFeedReaderCollectionCategory object containing the details of any categories associated with the entry. The supported fields include “term” (the machine readable category name), “scheme” (the categorisation scheme and domain for this category), and “label” (a HTML decoded human readable category name). Where any of the three fields are absent from the field, they are either set to the closest available alternative or, in the case of “scheme”, set to NULL.

The extended API for entries is identical to that for feeds with the exception of the Iterator methods which are not needed here.

Caution

There is often confusion over the concepts of modified and created dates. In Atom, these are two clearly defined concepts (so knock yourself out) but in RSS they are vague. RSS 2.0 defines a single <pubDate> element which typically refers to the date this entry was published, i.e. a creation date of sorts. This is not always the case, and it may change with updates or not. As a result, if you really want to check whether an entry has changed, don’t rely on the results of getDateModified(). Instead, consider tracking the MD5 hash of three other elements concatenated, e.g. using getTitle(), getDescription() and getContent(). If the entry was truly updated, this hash computation will give a different result than previously saved hashes for the same entry. This is obviously content oriented, and will not assist in detecting changes to other relevant elements. Atom feeds should not require such steps.

Further muddying the waters, dates in feeds may follow different standards. Atom and Dublin Core dates should follow ISO 8601, and RSS dates should follow RFC 822 or RFC 2822 which is also common. Date methods will throw an exception if DateTime cannot load the date string using one of the above standards, or the PHP recognised possibilities for RSS dates.

Warning

The values returned from these methods are not validated. This means users must perform validation on all retrieved data including the filtering of any HTML such as from getContent() before it is output from your application. Remember that most feeds come from external sources, and therefore the default assumption should be that they cannot be trusted.

Extended Entry Level API Methods

getDomDocument()	Returns the parent DOMDocument object for the entire feed (not just the current entry)
getElement()	Returns the current entry level DOMElement object
getXpath()	Returns the DOMXPath object used internally to run queries on the DOMDocument object (this includes core and Extension namespaces pre-registered)
getXpathPrefix()	Returns the valid DOM path prefix prepended to all XPath queries matching the entry being queried
getEncoding()	Returns the encoding of the source XML document (note: this cannot account for errors such as the server sending documents in a different encoding). The default encoding applied in the absence of any other is the UTF-8 encoding of Unicode.
getExtensions()	Returns an array of all Extension objects loaded for the current entry (note: both feed-level and entry-level Extensions exist, and only entry-level Extensions are returned here). The array keys are in the form {ExtensionName}Entry.
getExtension(string $name)	Returns an Extension object for the entry registered under the provided name. This allows more fine-grained access to Extensions which may otherwise be hidden within the implementation of the standard API methods.
getType()	Returns a static class constant (e.g. ZendFeedReaderReader::TYPE_ATOM_03, i.e. Atom 0.3) indicating exactly what kind of feed is being consumed.

Extending Feed and Entry APIs

Extending Zend\Feed\Reader\Reader allows you to add methods at both the feed and entry level which cover the retrieval of information not already supported by Zend\Feed\Reader\Reader. Given the number of RSS and Atom extensions that exist, this is a good thing since Zend\Feed\Reader\Reader couldn’t possibly add everything.

There are two types of Extensions possible, those which retrieve information from elements which are immediate children of the root element (e.g. <channel> for RSS or <feed> for Atom) and those who retrieve information from child elements of an entry (e.g. <item> for RSS or <entry> for Atom). On the filesystem these are grouped as classes within a namespace based on the extension standard’s name. For example, internally we have Zend\Feed\Reader\Extension\DublinCore\Feed and Zend\Feed\Reader\Extension\DublinCore\Entry classes which are two Extensions implementing Dublin Core 1.0 and 1.1 support.

Extensions are loaded into Zend\Feed\Reader\Reader using a Zend\ServiceManager\AbstractPluginManager implementation, Zend\Feed\Reader\ExtensionManager, so its operation will be familiar from other Zend Framework components. Zend\Feed\Reader\Reader already bundles a number of these Extensions, however those which are not used internally and registered by default (so called Core Extensions) must be registered to Zend\Feed\Reader\Reader before they are used. The bundled Extensions include:

Core Extensions (pre-registered)

DublinCore (Feed and Entry)	Implements support for Dublin Core Metadata Element Set 1.0 and 1.1
Content (Entry only)	Implements support for Content 1.0
Atom (Feed and Entry)	Implements support for Atom 0.3 and Atom 1.0
Slash	Implements support for the Slash RSS 1.0 module
WellFormedWeb	Implements support for the Well Formed Web CommentAPI 1.0
Thread	Implements support for Atom Threading Extensions as described in RFC 4685
Podcast	Implements support for the Podcast 1.0 DTD from Apple

The Core Extensions are somewhat special since they are extremely common and multi-faceted. For example, we have a Core Extension for Atom. Atom is implemented as an Extension (not just a base class) because it doubles as a valid RSS module - you can insert Atom elements into RSS feeds. I’ve even seen RDF feeds which use a lot of Atom in place of more common Extensions like Dublin Core.

Non-Core Extensions (must register manually)

Syndication	Implements Syndication 1.0 support for RSS feeds
CreativeCommons	A RSS module that adds an element at the <channel> or <item> level that specifies which Creative Commons license applies.

The additional non-Core Extensions are offered but not registered to Zend\Feed\Reader\Reader by default. If you want to use them, you’ll need to tell Zend\Feed\Reader\Reader to load them in advance of importing a feed. Additional non-Core Extensions will be included in future iterations of the component.

Registering an Extension with Zend\Feed\Reader\Reader, so it is loaded and its API is available to Feed and Entry objects, is a simple affair using the Zend\Feed\Reader\ExtensionManager. Here we register the optional Syndication Extension, and discover that it can be directly called from the Entry level API without any effort. Note that Extension names are case sensitive and use camel casing for multiple terms.

Zend\Feed\Reader\Reader::registerExtension('Syndication');
$feed = Zend\Feed\Reader\Reader::import('http://rss.slashdot.org/Slashdot/slashdot');
$updatePeriod = $feed->getUpdatePeriod();

In the simple example above, we checked how frequently a feed is being updated using the getUpdatePeriod() method. Since it’s not part of Zend\Feed\Reader\Reader‘s core API, it could only be a method supported by the newly registered Syndication Extension.

As you can also notice, the new methods from Extensions are accessible from the main API using PHP‘s magic methods. As an alternative, you can also directly access any Extension object for a similar result as seen below.

Zend\Feed\Reader\Reader::registerExtension('Syndication');
$feed = Zend\Feed\Reader\Reader::import('http://rss.slashdot.org/Slashdot/slashdot');
$syndication = $feed->getExtension('Syndication');
$updatePeriod = $syndication->getUpdatePeriod();

Writing Zend\Feed\Reader\Reader Extensions

Inevitably, there will be times when the Zend\Feed\Reader\Reader API is just not capable of getting something you need from a feed or entry. You can use the underlying source objects, like DOMDocument, to get these by hand however there is a more reusable method available by writing Extensions supporting these new queries.

As an example, let’s take the case of a purely fictitious corporation named Jungle Books. Jungle Books have been publishing a lot of reviews on books they sell (from external sources and customers), which are distributed as an RSS 2.0 feed. Their marketing department realises that web applications using this feed cannot currently figure out exactly what book is being reviewed. To make life easier for everyone, they determine that the geek department needs to extend RSS 2.0 to include a new element per entry supplying the ISBN-10 or ISBN-13 number of the publication the entry concerns. They define the new <isbn> element quite simply with a standard name and namespace URI:

JungleBooks 1.0:
http://example.com/junglebooks/rss/module/1.0/

A snippet of RSS containing this extension in practice could be something similar to:

<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0"
   xmlns:content="http://purl.org/rss/1.0/modules/content/"
   xmlns:jungle="http://example.com/junglebooks/rss/module/1.0/">
<channel>
    <title>Jungle Books Customer Reviews</title>
    <link>http://example.com/junglebooks</link>
    <description>Many book reviews!</description>
    <pubDate>Fri, 26 Jun 2009 19:15:10 GMT</pubDate>
    <jungle:dayPopular>
        http://example.com/junglebooks/book/938
    </jungle:dayPopular>
    <item>
        <title>Review Of Flatland: A Romance of Many Dimensions</title>
        <link>http://example.com/junglebooks/review/987</link>
        <author>Confused Physics Student</author>
        <content:encoded>
        A romantic square?!
        </content:encoded>
        <pubDate>Thu, 25 Jun 2009 20:03:28 -0700</pubDate>
        <jungle:isbn>048627263X</jungle:isbn>
    </item>
</channel>
</rss>

Implementing this new ISBN element as a simple entry level extension would require the following class (using your own class namespace outside of Zend).

class My\FeedReader\Extension\JungleBooks\Entry
    extends Zend\Feed\Reader\Extension\AbstractEntry
{
    public function getIsbn()
    {
        if (isset($this->data['isbn'])) {
            return $this->data['isbn'];
        }
        $isbn = $this->xpath->evaluate(
            'string(' . $this->getXpathPrefix() . '/jungle:isbn)'
        );
        if (!$isbn) {
            $isbn = null;
        }
        $this->data['isbn'] = $isbn;
        return $this->data['isbn'];
    }

    protected function registerNamespaces()
    {
        $this->xpath->registerNamespace(
            'jungle', 'http://example.com/junglebooks/rss/module/1.0/'
        );
    }
}

This extension is easy enough to follow. It creates a new method getIsbn() which runs an XPath query on the current entry to extract the ISBN number enclosed by the <jungle:isbn> element. It can optionally store this to the internal non-persistent cache (no need to keep querying the DOM if it’s called again on the same entry). The value is returned to the caller. At the end we have a protected method (it’s abstract so it must exist) which registers the Jungle Books namespace for their custom RSS module. While we call this an RSS module, there’s nothing to prevent the same element being used in Atom feeds - and all Extensions which use the prefix provided by getXpathPrefix() are actually neutral and work on RSS or Atom feeds with no extra code.

Since this Extension is stored outside of Zend Framework, you’ll need to register the path prefix for your Extensions so Zend\Loader\PluginLoader can find them. After that, it’s merely a matter of registering the Extension, if it’s not already loaded, and using it in practice.

if (!Zend\Feed\Reader\Reader::isRegistered('JungleBooks')) {
     $extensions = Zend\Feed\Reader\Reader::getExtensionManager();
     $extensions->setInvokableClass('JungleBooksEntry', 'My\FeedReader\Extension\JungleBooks\Entry');
     Zend\Feed\Reader\Reader::registerExtension('JungleBooks');
}
$feed = Zend\Feed\Reader\Reader::import('http://example.com/junglebooks/rss');

// ISBN for whatever book the first entry in the feed was concerned with
$firstIsbn = $feed->current()->getIsbn();

Writing a feed level Extension is not much different. The example feed from earlier included an unmentioned <jungle:dayPopular> element which Jungle Books have added to their standard to include a link to the day’s most popular book (in terms of visitor traffic). Here’s an Extension which adds a getDaysPopularBookLink() method to the feel level API.

class My\FeedReader\Extension\JungleBooks\Feed
    extends Zend\Feed\Reader\Extension\AbstractFeed
{
    public function getDaysPopularBookLink()
    {
        if (isset($this->data['dayPopular'])) {
            return $this->data['dayPopular'];
        }
        $dayPopular = $this->xpath->evaluate(
            'string(' . $this->getXpathPrefix() . '/jungle:dayPopular)'
        );
        if (!$dayPopular) {
            $dayPopular = null;
        }
        $this->data['dayPopular'] = $dayPopular;
        return $this->data['dayPopular'];
    }

    protected function registerNamespaces()
    {
        $this->xpath->registerNamespace(
            'jungle', 'http://example.com/junglebooks/rss/module/1.0/'
        );
    }
}

Let’s repeat the last example using a custom Extension to show the method being used.

if (!Zend\Feed\Reader\Reader::isRegistered('JungleBooks')) {
     $extensions = Zend\Feed\Reader\Reader::getExtensionManager();
     $extensions->setInvokableClass('JungleBooksFeed', 'My\FeedReader\Extension\JungleBooks\Feed');
     Zend\Feed\Reader\Reader::registerExtension('JungleBooks');
}
$feed = Zend\Feed\Reader\Reader::import('http://example.com/junglebooks/rss');

// URI to the information page of the day's most popular book with visitors
$daysPopularBookLink = $feed->getDaysPopularBookLink();

Going through these examples, you’ll note that we don’t register feed and entry Extensions separately. Extensions within the same standard may or may not include both a feed and entry class, so Zend\Feed\Reader\Reader only requires you to register the overall parent name, e.g. JungleBooks, DublinCore, Slash. Internally, it can check at what level Extensions exist and load them up if found. In our case, we have a full set of Extensions now: JungleBooks\Feed and JungleBooks\Entry.